ZZ® 330 Fire Protection Foam
ZZ® 330 Fire Protection Foam is a two-component polyurethane foam from a cartridge, which is mixed with halogen-free fire protection additives and intumesces in the event of a fire. It is used in ZZ® M20, ZZ® M30 and ZZ® M60 systems.
In accordance with ETA, it can also be used in supply and operating rooms in tunnels.
| Name | ZZ® 330 Fire Protection Foam |
| Manufacturer | ZAPP-ZIMMERMANN |
| Designation | Content | Art. no. | PU |
|---|---|---|---|
| ZZ® 330 Fire Protection Foam | 1x cartridge, incl. 2 x mixing nozzles | B15V01-0007 | 1 |
| ZZ® 330 Fire Protection Foam | 6x cartridge, incl. 8 x mixing nozzles | B15V06-0006 | 1 |
| ZZ® 330 Fire Protection Foam | 360x cartridge, incl. 480 x mixing nozzles | B15VP1-0006 | 60 |
Detailed information
- Downloads
- Description
Trade name: ZZ® 330 Fire Protection Foam
Description: Two-component polyurethane foam system from a cartridge, mixed with halogen-free fire protection additives, which intumesces in the event of a fire. In addition to its outstanding technical fire safety properties, ZZ® 330 Fire Protection Foam is particularly characterised by its easy processing. It can be used as a mixed penetration seal (EI 90), as well as a pure cable penetration seal (EI 60/ EI 90/ EI 120). The optimal match between the beginning of the reaction and hardening enables sufficiently long work interruptions for the user, as well as fast work progress. Thanks to the high viscosity, the user does not have to deal with foam running out of the penetration seal. After hardening, the permanently elastic structure of the penetration seal enables easy retroactive-installation.
Can be used in:
- ZZ® M20
- ZZ® M30
- ZZ® M60
- Additional Information
Product Information incl.2 x mixing nozzles per cartridge
coating materials Plastic dispersion paint, alkyd resin paint, polyurethane acrylic paint, epoxy resin lacquer Gaseous chemicals Short-term storage above concentrated ammonium hydroxide solution Solvents/Oils Trichloroethylene, xylene, acetone, white spirit, butyl acetate, butanol, EL heating oil Compression hardness Cv (40%) = 18kPa Test standard: DIN EN ISO 3386-1 Classification of the reaction to fire according to DIN EN 13501-1 Class E Building material class DIN 4102-B2 Thermal stress Continuous contact or ambient temperature: ≤ 80 °C Indoor air hygiene Requirements according to AgBB scheme 2015 are met Test standards: prEN 16516, ISO 16000-3, ISO 16000-6, ISO 16000-9 Surface resistivity R0 = 2 x 109 Ω Test standard: BGR 132:2003 (2.6), DIN IEC 60167 (For requests for installation in hazardous areas please contact ZAPP-ZIMMERMANN GmbH) airborne sound insulation Dn,e,w(C;Ctr) = 66 (-1; -7) dB Rw(C;Ctr) = 47 (-1; -7) dB Test standard: EN ISO 717-1 (Specimen dimensions 350 x 350 x 170 [mm], tested without installations) Expansion ratio 1.6 to 4.5 times. Tested on samples at 450 °C for 25 minutes with applied load. The expansion factor is a laboratory parameter. The expansion behavior in the installed state depends on the existing boundary conditions. Expansion pressure No expansion pressure measurable Bulk density ρ ≥ 215 kg/ Cutability After approx. 90 seconds (at 72 °F /22 °C material temperature and ambient temperature) Work interruption approx. 50 seconds (at 22 °C material temperature and ambient temperature) The specifications vary depending on the material and ambient temperature. Foam yield Up to 2.1 litres (at 22 °C material temperature and ambient temperature) Application temperature 59 °F to 86 °F (15 °C to 30 °C), recommended: 68 °F – 77 °F (20 °C to 25 °C) Transport / storage dry in original containers Storage temperature 5 °C – 30 °C storage stability 12 months at 23 °C / 50 % RH, best before date see cartridge imprint safety instructions Please refer to the safety data sheet.
